Our elevator sump pumps are fully code compliant and designed for simple installation with very little maintenance.

PRODUCT LINE:
Our product line consists of the following systems and we have the ability to customize any system to your unique specifications. (Click on ESA Model Number for view pump curves)

• (ESA 50/100) ½ HP- 50GPM @ 12′-0″
• (ESA 75/100) 3/4 HP 50GPM @12’+ to 21′-0″
• (ESA 100/100) 1HP 50 GPM @ 21’+ to 30′-0″
• (ESA50/100HF) 1/2HP* 100 GPM @ 15′ max (2 elevators in same shaft)
• (ESA100/100HF) 1HP*  150 GPM @ 15′ max (3 elevators in same shaft)**                                                                            ** The ESA 100/100HF requires 240 VAC 15 amp single phase circuit.                       

*We now have a single pump system capable or servicing (2) elevators (duplex) in the same shaft that will pump 6,000 GPH with up to 15 feet of head (ESA50/100HF) ½ HP. and a single pump system capable of servicing (3) elevators (triplex) in the same shaft that will pump 9000 GPH with up to 15 feet of head (ESA100/100HF) 1HP. This system (ESA100/100HF) is also capable or servicing (2) elevators with up to 25 feet of head.

DESCRIPTION:
The Elevator Sump Pump and Oil Alarm System allows water to be automatically pumped from the elevator sump pit, in accordance with the below code, without risk of pumping oil into the municipal wastewater system. The Elevator Sump and Oil Alarm System is the most cost effective method to meet code requirements.

The system designer spent over 26 years with Otis Elevator Company. His expert knowledge of the elevator business was instrumental in the development of the system.

CODE INFORMATION:
The ASME A17.1 and ASME A17.1-2002 requires, in Section 2.2.2.5, that for all elevators with Firefighter’s Emergency Operation a drain or sump pit and pump shall be provided.

FEATURES:
Code Compliance
– Complies with ASME A17.1
– Meets/Exceeds E.P.A. requirements

Fast and easy Installation
– Fully wired and assembled.
– All components located in elevator pit
– Check valve included, 1-1/2″ or 2″ PVC discharge connection,all necessary mounting    hardware is also included.
– Each system is tested for proper operation prior to shipping
– Field installation time of approximately 1 hour

Reliable Performance
– Pumps out water from elevator sump pits automatically
– Simplified mechanical and solid state design
– Controller has no moving parts and requires no maintenance
– Sensor probes are 303 Stainless Steel
– High oil/water float switch with audible alarm
– State of the art technology

Peace of Mind
– System safely pumps water out of elevator sump pit
– System probe senses oil and immediately triggers the pump to stop
– Protects against pumping oil into municipal wastewater system
– High oil/water float switch with audible alarm